General

Can I use Scan Engine?
Answer: Not directly. ThirdParty modules (like WireFlow's) can't run in scan mode. But, it is quite easy to mix WireFlow C Series modules with o...
Thu, 9 Jul, 2020 at 12:34 PM
What kind of connectors are used on WireFlow's modules?
Answer: WireFlow's modules use standardized connectors. Different modules use different connectors. The WF 3132 module has a 37-pin male D-sub conne...
Thu, 9 Jul, 2020 at 12:35 PM
How much FPGA resources does a C-Series module consume?
Answer: The FPGA usage of a specific software and hardware combination is affected by multiple factors such as; FPGA type and size, compilation options, the...
Thu, 9 Jul, 2020 at 12:37 PM
Is this C-series module compatible with cDAQ-systems from NI?
Answer: At the moment only the WF 3132 module works on CompactDAQ systems.  All of WireFlow's C-series modules are compatible with the CompactRIO sy...
Thu, 9 Jul, 2020 at 12:38 PM
Can I use WireFlow's modules with Veristand?
Answer: Yes, there are multiple ways to use WireFlow's modules in Veristand. Check out our application note for more details. App note: AN14 - Inte...
Thu, 9 Jul, 2020 at 12:51 PM
Why isn't my module detected in the cRIO?
Answer: In most cases it's due to one of the following reasons. Reason #1 - NI bug in DAQmx-enabled CompactRIOs NI's cRIO-904X and cRIO-905X Co...
Fri, 5 Jan, 2024 at 10:18 AM
Do you have software drivers for the module in ‘C’ or ‘C++’?
Unfortunately, we don't have any C/C++ driver for these modules, but they should be accessible via C/C++ if you first create a FPGA bitfile in LabVIEW t...
Fri, 15 Jan, 2021 at 11:35 AM
Do you have 3D CAD models for the c series modules
Since our c series modules are mechanically identical with NI c series modules you can use 3D models for NI modules which can be downloaded from NI web. Jus...
Fri, 11 Nov, 2022 at 11:41 AM
Compile error 61055 in LabVIEW 2023
There is an issue with LabVIEW 2023 Q3 The response we got from NI regarding this issue was It is to do with the version of a certain component/dll “ni...
Sun, 3 Mar, 2024 at 3:54 PM