WF 3144 Programmable Resistor Module
WF 3144 Programmable Resistor Module
Answer: Yes, the WF 3144 is well suited for simulating PT-100 sensors. Many of our customers use the WF 3144 for PT-100 simulations in for example HIL (...
Wed, 8 Jul, 2020 at 4:56 PM
Answer: Yes, the WF 3144 is very well suited to simulate both NTC and PTC thermistors. Check out our application note for more details. App note: AN10 ...
Thu, 9 Jul, 2020 at 12:43 PM
Answer: The resolution of the WF 3144 varies over the range and can't be expressed in bits or ohms. Instead the resolution is expressed as a error that ...
Wed, 8 Jul, 2020 at 4:39 PM
The module could easily simulate PT1000 sensors, the only difference is that the error is slightly higher than for PT100. For the range you specified, -15...
Mon, 26 Oct, 2020 at 3:33 PM
Yes you can! The highest possible resistance that can be set is 768kOhms. The error will however be >10%.
Fri, 18 Dec, 2020 at 6:05 PM
Yes you can! To set infinite resistance (Open Circuit), use -1 (or any negative number) as the resistance input.
Fri, 18 Dec, 2020 at 6:26 PM
We assume that your system uses cDAQ-9188 that is connected to a PC via Ethernet cable where you run your applications developed in LabVIEW and using DAQmx ...
Wed, 4 Sep, 2024 at 11:31 AM